-Good wear resistance, resistance to steel wool friction more than 5000 times;
-Excellent adhesion, cross lattice adhesion up to grade 0;
-Strong weather resistance, no change in the conditions of sun, rain, wind, summer heat, cold weather and other temperature changes, and no yellowing after a long time;
-Flat coating film and good fullness;
-Good flexibility and high hardness;
-Colorless and transparent, no effect on the color and appearance of the original substrate;
-Easy to use, suitable for large-scale industry coating.
Application:
The coating is suitable for the wear-resistant and hardening treatment on marble and ceramic tiles, such as marble floor, marble workbench, marble furniture and so on.
Usage:
According to the shape, size and surface state of the substrate, the appropriate application methods, such as shower coating, wiping coating, and spraying is selected. It is suggested that a small area should be tested before application. Take shower coating as an example to describe application steps briefly as follows:
Step 1: Coating. Choose the appropriate coating process;
Step 2: After coating, stand at room temperature for 3 minutes to make the full leveling;
Step 3: Drying. Heating for 1 minute in the oven at 130 ℃ and fully volatilizing the solvent;
Step 4: Curing. 3000W UV lamp (with a distance of 10-20 cm, wavelength of 365 nm) curing for 10 seconds.
Notes: 1.Keep sealed and store in a cool place, make the label clear to avoid misusing. 2.Keep far from the fire, at the place where children can't reach; 3. Ventilate well and prohibit the fire strictly; 4. Wear PPE, such as protective clothing, protective gloves and goggles; 5. Prohibit contacting with the mouth, eyes and skin, in case of any contact, flush with large amount of water immediately, call a physician if necessary.Packing:
Packing:1 liter/bottle; 20 liter/barrel.
Storage: In a cool, dry place, avoiding sun exposure.