-Good wear resistance, steel wool friction resistance more than 5000 times;
-High hardness, excellent adhesion, cross lattice adhesion up to grade 0;
-Strong weather resistance, no change in the sun, rain, wind, hot or cold weather, and no yellowing after enough long time;
-Colorless and transparent, no effect on the color and appearance of the original substrate;
-Easy to use, suitable for large-scale industrial coating.
Application:
The coatings are suitable for hardening, wear-resisting and anti-fouling surface treatment on wood floor, furniture, etc.
Usage:
According to different shape, size and surface state of the base material, appropriate application methods such as shower coating, wiping coating or spray coating is selected. It is suggested to try coating in a small area before application. Take shower coating for example to describe application steps briefly as follows:
Step 1: Primer coating. Clean and dedusting the substrate after grinding, select the appropriate process to coat the primer, and leave it for 3 minutes after coating. Step 2: Heat-curing of primer coating. Heating at 100℃ for 1-2 minutes. Step 3: Surface coating. Sanding, dust removal, selection of appropriate process for coating; Step 4: UV curing of surface coating. 3000 W UV lamp (10-20 cm apart, wavelength365 nm) illuminates for 10 seconds for curing. Notes: 1. Keep sealed and store in a cool place, make the label clear to avoid misusing. 2. Keep far from the fire, at the place where children can't reach; 3. Ventilate well and prohibit the fire strictly; 4. Wear PPE, such as protective clothing, protective gloves and goggles; 5. Prohibit contacting with the mouth, eyes and skin, in case of any contact, flush with large amount of water immediately, call a doctor if necessary.Packing:
Packing: 20 Kg/barrel.
Storage: In a cool, dry place, avoiding sun exposure.