Anti static coating for packaging film

Paremeter: Feature: Resistance 105-106 Ω·cm, stable resistance, not affected by humidity and temperature; Long lasting, good weather resistance, service life 5-8 years; Good transparency, VLT can reach more than 85%; The adhesion can reach level 0 (100-grid method), and the coating does not fall off; The coating adopts environment-friendly solvent, small smell. Application: -Used for manufacturing various electronic touch screens, various transparent circuits and electrodes; -Used for manufacturing various transparent conductive films and sheets; -Available base materials: PET, PP, PE, PC, acrylic, glass, ceramic, metal or other materials. Usage:

According to the shape, size and surface state of the substrate, the appropriate application methods, such as shower coating, wiping coating, and spraying is selected. It is suggested that a small area should be tested before application. Take shower coating as an example to describe application steps briefly as follows:

Step 1: Coating.

Step 2: Curing. At room temperature, surface drying after 20 minutes, completely drying after 3 days; or heating at 100-120℃ for 5 minutes, to get cured quickly.

  Notes: 1. Keep sealed and store in a cool place, make the label clear to avoid misusing. 2. Keep far from the fire, at the place where children can't reach; 3. Ventilate well and prohibit the fire strictly; 4. Wear PPE, such as protective clothing, protective gloves and goggles; 5. Prohibit contacting with the mouth, eyes and skin, in case of any contact, flush with large amount of water immediately, call a doctor if necessary. Packing:

Packing: 20 liter/barrel.

Storage: In a cool, dry place, avoiding sun exposure.